• Top accessory cover.
• Duplex accessory cover and Tray 2 extension door. See Envelope feed accessory covers
• Formatter cover and formatter cage. See Formatter cover, formatter cage, and formatter PCA
• Top cover.
2. Gently pry the front-cover retainers off of the Tray 1 arms.
Figure Remove the left-side cover
3. Release two tabs (callout 3), and then rotate the top of the cover away from the product and lift the cover up to remove it.
Figure Remove the left-side cover
4. Rotate the top of the cover away from the product and lift the cover up to remove it.
Figure Remove the left-side cover
Right-front cover
1. Remove the following components:
• Top accessory cover.
• Formatter cover and formatter cage. See Formatter cover, formatter cage, and formatter PCA
• Top cover.
• Right-side cover.
2. Open the front cover.
3. Remove one screw (callout 1).
Figure Remove the right-front cover
4. Gently pull the envelope-feeder connector cover (callout 2) off of the product to remove it.
Figure Remove the right-front cover
5. Remove two screws (callout 3).
Figure Remove the right-front cover
6. Remove the right front cover.
Figure Remove the right-front cover
0 komentar:
Posting Komentar