Drum-drive assembly
1. Remove the following components:
• Top accessory cover.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
• Fan FN103.
• Drum-motor assembly.
• DC controller PCA.
2. Remove one screw (callout 1) and the fan FN103 duct.
Figure Remove the drum-drive assembly
3. Release the wire-harnesses from the retainer on the fan FN102 duct (callout 2)
Figure Remove the drum-drive assembly
4. Remove three screws (callout 3).
Figure Remove the drum-drive assembly
5. Carefully remove the drum-drive assembly.
Figure Remove the drum-drive assembly
Reinstall the drum-drive assembly
When the drum-drive assembly is reinstalled, make sure that the spring is correctly positioned in the assembly.
Figure Reinstall the drum-drive assembly
0 komentar:
Posting Komentar