Removal and replacement Right side cover Reinstall the right cover printer hp laserjet p 4010 and p 4015 series

1. Remove the following components:
• Top accessory cover.
• Formatter cover and formatter cage. See Formatter cover, formatter cage, and formatter PCA
on page 152.
• Top cover.
2. Release three tabs (callout 1).

Figure  Remove the right-side cover

3. Carefully separate the cover from the product near the control panel.

Figure Remove the right-side cover

4. Rotate the top of the cover away from the product, and then and lift the cover up to remove it.

Figure  Remove the right-side cover

Reinstall the right cover

1.If you are installing a replacement cover, remove the engine-test button (callout 1) from the discarded cover and then install it on the replacement cover.

Figure  Install the right cover

When the cover is installed, make sure that the switch-connecting rod (callout 2) snaps into the power-switch arm (callout 3).

Figure  Install the right cover

Related Posts by Categories